Description

Contains: 1 Slotted Crossarm 2 Way/3 Way, 1 Standard Detachable Tip, 1 Forcing Screw, Each 3 pcs. Cap Screw 3/8”-24NFx3″”,
3/8”-16NFx4” & 3/8”-16NCx3”, 1 Slotted Crossarm 2 Way, Each 1 pc. 2 & 3 Jaw Yoke, 3 Inside Jaw 2” Reach, Each 3 Reversible Jaw 4” & 6” Reach,
1 Reversible Adjusting Nut, 3 Jaw Pivot Pin,1 2-1/2 Lb.Slide Hammer, 1 T-Handle Slide Rod 24” Long, 1 5 Lb. Slide Hammer, 1 Short Slide Rod,
1 Rear Axle Flange Foot, 1 Inside Hook Jaw, 1 Set Puller Blind Bearing, 3 Adjustable Jaw Block Assembly, 3 Dual-Reach Jaw, 3 Narrow Jaw,
1 2 Way/3 Way Crossarm, 3 Adjustable Jaw Block Assembly, 1 Standard Tip, 1 Forcing Screw, 1 2 Way/3 Way Crossarm, 3 Adjustable Jaw Block Assembly,
1Standard Tip, 1 Forcing Screw, Each 1 2 & 3 Way Crossarm 11” Long, 3 Dual-Reach Jaw, 3 Long Narrow Jaw, 3 Cap Screw Jaw,
6 Spring Clip, Each 1 Bearing Separator 2-13/32” & 6” Capacity, 1 Step Plate Adapter Set, Each 1 Step Plate 2-1/8”, 2-1/4” & 2-3/8” Bore.

Covers most maintenance operations using standard pullers.
Contains components necessary to assemble all full-interchange system pullers except Proto® Press-N-Pull™Pullers.
Weight: 73.00 lbs.