Description

MD Electronic Control Booster Pump

The MD water pump is a complete, all-in-one unit, consisting of pump, motor, pressure tank, and electronic controller.

The built-in electronic controller provides constant pressure which ensures that the pump starts automatically when water is consumed and operates continuously until water is not required.

Features

This MD Series are designed for pressure boosting in residential and commercial applications.
Cold Water Series pumps use strong multistage plastic impellers for water up to +40°C. Hot Water Series adopt stainless steel impellers which suitable for solar energy or other types of hot water system (up to +90°C).
Compact design and quiet operation.
The motor has built-in thermal overload to protect against high operating temperatures.
It has an anti-cycling feature which prevents the pump from continuous starting and stopping when you have a dripping tap or minor leak in the system.
Relief valve assembled in Hot Water Series will automatically release the pressure when the pump full system pressure exceeds 5kg/cm².
Indicator light can easy to check the pump status

Operation Conditions

Suitable liquid: potable water or other clean or non-corrosive liquids.
Ambient temperature: Max. +40°C
Liquid temperature: +4°C ~ +90°C
Relief pressure valve automatically: 5kg/cm²
Relative humidity: Max. 85% (RH)

– Start up pressure at 2 bars or 30psi

Specifications:

Input: 680 watts
Output : 500 watts
Voltage & Frequency : 1 phase 240V 50 Hz
Inlet & Outlet size : 1 “
Max suction : 6m
Max Head : 31m
Max flow rate : 84 Liter per min or 5m3/hr
Size : 43 x 18.5 x 23.4 cm
Approx weight : 10 Kg