Description
Full Body Harness – Orex 01-Class A
Plus Energy Absorber Lanyard – Orex 02R- Type 2 ( Max 2m)
Elongation length : 1.75m
Plus connector – Orex 05X
Certified by SETSCO Services Singapore
This full body harness is made of Polyester & designed according to SS528: Part 1: 2006
and is designed to use together with Orex 02 energy absorber lanyard ( according to SS528: Part 2: 2006, SS528: Part 5: 2006) to be used for working at height where the provisions of general building construction site, work on roofs, suitable barriers or other similar safeguard is impracticable.
Note : User of fall-protection equipment whose total mass ( including tools & equipment) exceeds 100 Kg are to seek advice from the manufacturer regarding the suitability of this equipment.
This full body harness is to be used with energy absorber lanyard in PFAS where, due to installation, the arrest distance will be controlled , and if a fall take place, the arresting force is limited to a max of 6kN.
This product is designed to minimize the risk of provided protection against falling and the dangers resulting from falling down. However, always remember no item of PPE can provide full protection and care must always be taken while carrying out the risk relation activity.
This safety harness must only be used by a person previously trained for working at heights. The capital letter “A” on the back supports is marking according to SS528: part 1 : 2006 including that this in an attachment point for fall arrest purpose. Attachment points not marked with an “A” are not allowed to use for fall arrest purpose.
Read the instructions booklet provided carefully before use .
Reviews
There are no reviews yet.