Description
Crosby G-2130/S-2130 Bolt Type Shackles are Bolt Type Anchor shackles with thin head bolt – nut with cotter pin. Meets the performance requirements of Federal Specification RR-C 271G, Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
- Capacities 1/3 thru 150 metric tons, grade 6.
- Working Load Limit and grade “6” permanently shown on every shackle.
- Forged – Quenched and Tempered, with alloy bolts.
- Hot Dip galvanized or self colored. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)
- Sizes 3/8 and below are mechanically galvanized.
- Fatigue rated (1/3t – 55t).
- Shackles 25t and larger are RFID EQUIPPED.
- Approved for use at -40° C (-40° F) to 204° C (400° F).
- Meets or exceeds all requirements of ASME B30.26.
- Shackles 85 metric tons and larger are individually proof tested to 2.0 times the working load limit.
- Type Approval certification in accordance with ABS 2016 Steel Vessel Rules
- ABS Guide for Certification of Lifting Appliances available. Certificates available when requested at time of order and may include additional charges.
- 3.1 Certification as standard available for charpy and statistical proof test from 3.25t up to 25 tons to DNV2.7-1 and EN13889. Crosby 3.25t through 25t G2130OC anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested to 42 Joules (31 ft•lbf) min. avg. at -20° C (-4° F). The tests are conducted by Crosby and 3.1 test certification is available upon request. Refer to page 87 for Crosby COLD TUFF® shackles that meet the additional requirements of DNV rules for certification of lifting applications – Loose Gear.
- All other 2130 shackles can meet charpy requirements of 42 Joules (31 ft•lbf) avg at -20° C (-4° F) when requested at time of order.
- Look for the Red Pin® . . . the mark of genuine Crosby quality
Specifications:
Galvanized material
Approved for use at -40 deg C to 204 deg C
Meet or exceed all requirements of ASME B30.26
Unit weight : 0.33 lbs or 0.149Kg
Dimensions :
A = 0.66 ins F = 0.91ins
B = 0.44ins H = 2.49ins
C = 1.44ins L = 1.78ins
D = 0.38ins M = 2.17ins
E = 1.03ins N = 0.38ins
Tolerance +/-
C = .13ins
A= .06ins
Reviews
There are no reviews yet.