DOWSIL™ 896 PanelFix 600ml Sausage Pack – Black

Description

MOQ 1 carton of 20 Sausages

FEATURES & BENEFITS
 Instant Green Strength directly after application
 High strength silicone sealant
 One-part moisture curing
 Low squeeze-out
 UV- and weather-resistant
 Primerless adhesion to a wide range of substrates
 Neutral cure
 Low odor
 Elastic bonding silicone
 No creep under high temperature
 Temperature stability up to 150°C
 Fast & easy panel bonding
 Safe assembly due to fast strength build up
 High longevity
 Factory bonding and on-site application
 Compatible & approved package: Silicone & Tape
 CE marked according to EN 12004
 BBA Certificate No 16/5306

One-part silicone with immediate initial strength for Panel Bonding applications
APPLICATIONS
DOWSIL™ 896 PanelFix is an elastic one-part neutral curing silicone sealant specifically designed for panel bonding applications that require high durability and fast handling.
It provides immediate strength directly after application.
DOWSIL 896 PanelFix is a silicone which shows primerless adhesion to a variety of substrates such as anodized and mill finish aluminum, and mineral substrates
and provides high strength once fully cured.
DOWSIL 896 PanelFix is not suitable for structural glazing applications

TYPICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing
specifications.
Test*                       Property                                                 Unit                       Result
As supplied – uncured state
CTM 97B              Specific gravity                                     g/ml                        1.53
ASTM D2202      Flow (sag or slump)                             mm                           0
ASTM C 679        Tack-free time (23°C, 50% R.H.)     minutes                 15–20
CTM 663A          Curing Time (23°C, 50% R.H.)
– after 24 hours                                      mm                        1.9
– after 72 hours                                       mm                        3.2
CTM 1430         Immediate strength                             Pa                           > 1400
As cured after 7 days at +23°C 2 mm sheet (ISO 37)
CTM 99A          Durometer hardness, Shore A           Points                     46
CTM 137A        Modulus at 100% elongation             MPa                        1.0
CTM 137A        Tensile strength at break                    MPa                        1.8
CTM 137A       Elongation at break                               %                            > 450
Properties after 28 days cured at 50% RH and +23°C
ISO 8339         Elongation at break                              %                            > 100
Tensile strength                                   MPa                        > 1.0
Allowable design strength – Windload kPa                    140
Allowable design strength – Deadload kPa                      30
*CTM: Corporate Test Method, copies of CTM’s are available on request.
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization