Volkel 35pcs Set Hand taps and round dies, UNF 1/4 – 1“

Description

Application:

for general use:

• non abrasive material up to 900 N/mm²
• unalloyed and low alloyed steel
• for through and blind holes
• for thread cutting by hand
• HSS-G Hand taps acc. to ≈ DIN 2181
• HSS Round dies acc. to DIN 223 (DIN EN 22568)

Contents:

• 1x HSS-G Hand taps (set of 2 pcs.) UNF 1/4 (24314)
• 1x HSS-G Hand taps (set of 2 pcs.) UNF 5/16 (24316)
• 1x HSS-G Hand taps (set of 2 pcs.) UNF 3/8 (24318)
• 1x HSS-G Hand taps (set of 2 pcs.) UNF 7/16 (24320)
• 1x HSS-G Hand taps (set of 2 pcs.) UNF 1/2 (24322)
• 1x HSS-G Hand taps (set of 2 pcs.) UNF 5/8 (24326)
• 1x HSS-G Hand taps (set of 2 pcs.) UNF 3/4 (24330)
• 1x HSS-G Hand taps (set of 2 pcs.) UNF 7/8 (24334)
• 1x HSS-G Hand taps (set of 2 pcs.) UNF 1″ (24338)
• 1x HSS Round die UNF 1/4 (24414)
• 1x HSS Round die UNF 5/16 (24416)
• 1x HSS Round die UNF 3/8 (24418)
• 1x HSS Round die UNF 7/16 (24420)
• 1x HSS Round die UNF 1/2 (24422)
• 1x HSS Round die UNF 5/8 (24426)
• 1x HSS Round die UNF 3/4 (24430)
• 1x HSS Round die UNF 7/8 (24434)
• 1x HSS Round die UNF 1″ (24438)
• 1x Adjustable tap wrench, zinc die cast No. 1 (13010)
• 1x Adjustable tap wrench, zinc die cast No. 4 (13040)
• 1x Die stock, zinc die cast 20×7 mm (15003)
• 1x Die stock, zinc die cast 25×9 mm (15004)
• 1x Die stock, zinc die cast 30×11 mm (15005)
• 1x Die stock, zinc die cast 38×10 mm (15006)
• 1x Die stock, zinc die cast 45×14 mm (15008)
• 1x Die stock, zinc die cast 55×16 mm (15010)

All threading tools, threading tool holder and accessories can also be ordered separately.

Picture shown for illustration purpose only